INDICAID™ COVID-19 Rapid Antigen At-Home Test - FAQ
Have a question about your INDICAID OTC COVID-19 RAPID ANTIGEN AT-HOME TESTS? See our FAQ below for more information. If you have additional questions, please contact us at
Covid testing
What is swab testing?
Swab testing is a method used to collect upper respiratory samples, which are then analyzed for viruses like COVID-19. It’s simple and widely recommended by health organizations like the CDC for its effectiveness in quickly gathering data.
How do antigen tests differ from other COVID-19 tests?
Antigen tests detect proteins from the virus, while molecular (PCR) tests detect the virus's genetic material. Antigen tests are less sensitive than PCR tests, meaning they may miss some cases of COVID-19. A positive antigen test is accurate, but a negative result might require additional testing.
Should I consider antigen test results as definitive for COVID-19?
No, antigen tests are less sensitive than molecular tests. Negative results should be treated as preliminary, especially if you have symptoms or recent exposure, and may need to be confirmed with a molecular test.
About the kits
What is the INDICAID™ COVID-19 Rapid Antigen At-Home Test?
The INDICAID™ COVID-19 Rapid Antigen At-Home Test is a self-use diagnostic tool for rapid detection of SARS-CoV-2 antigen using an anterior nasal swab sample.
What are the advantages of the INDICAID COVID-19 Rapid Antigen Test?
This test is easy to use, requires no special equipment, and has high sensitivity. It can detect even lower levels of the virus and is authorized for emergency use by the FDA.
How accurate are the INDICAID OTC COVID-19 RAPID ANTIGEN AT-HOME test kits?
Our Rapid Antigen tests offer results with a sensitivity of around 85-90% and specificity close to 95%, making them effective for quick screenings.
What are the potential benefits and risks of this test?
Benefits: The test helps inform care decisions and may help prevent the spread of COVID-19 by identifying infections early.
Risks: Discomfort during the sample collection and the chance of an incorrect result.
Who can use this test?
- Individuals aged 14 years and older can self-collect nasal swabs.
- For children aged 2 to 13, an adult must collect the nasal sample.
Can the test be used on children?
The test kits are designed for use by adults and children. For children, aged 2 to 13 years, an adult must perform the test.
When should I use this test?
This test is intended for individuals:
- With symptoms of COVID-19 within the first 6 days of symptom onset, tested twice over three days (48 hours apart).
- Without symptoms, tested three times over five days (48 hours apart).
Do I need a prescription to get INDICAID OTC COVID-19 RAPID ANTIGEN AT-HOME TESTS?
No, you can take the test at home at any time. The Indicaid OTC Covid-19 Rapid Antigen At-Home test is authorized for non-prescription use under Emergency Use Authorization (EUA) by the FDA.
If you have any doubts about taking the test yourself, consult with a doctor or your primary healthcare provider first.
Can I use COVID-19 test kits if I have been vaccinated against COVID-19?
Yes, our test kits are designed to detect current infections regardless of vaccination status. They are suitable for anyone needing to verify their COVID-19 status.
What is included in the test kit?
Each test kit includes:
- 2 Test devices
- Buffer solution vials
- Sterile nasal swabs
- A Quick Reference Guide (instructions)
A timer is required but not included.
How accurate is the test?
For symptomatic individuals, the test identifies 81.7% of COVID-19 positive cases (PPA).
It accurately identifies 99.4% of negative cases (NPA).
Are the test kits authorized or approved by relevant health authorities?
Our test kits are authorized for emergency use under the Emergency Use Authorization (EUA) by the FDA, which ensures they meet the necessary standards for accuracy and safety during the pandemic.
Testing
How do I perform the test?
- Collect a nasal swab sample from both nostrils.
- Insert the swab into the buffer solution vial and mix.
- Apply 3 drops of the solution to the test device.
- Wait 20 minutes and read the result.
For a more detailed instruction, please refer to the User instructions included in your kit, or refer to the next FAQ.
What are the step-by-step instructions for taking the test?
GATHER YOUR SUPPLIES
- Check the expiration date on the outside of the product box.
- Remove 1 swab, 1 test device pouch, and 1 buffer solution vial.
- Check the buffer solution volume in the vial. If the vial is empty, DO NOT use, and obtain a new buffer solution vial.
WASH YOUR HANDS
- Wash your hands thoroughly for at least 20 seconds before and after handling nasal swab samples.
REMOVE ENTIRE BUFFER SOLUTION VIAL CAP
- Twist off the entire cap (purple & white parts together) from the buffer solution vial. Place the vial and cap on a horizontal (flat) surface.
REMOVE THE NASAL SWAB FROM ITS POUCH
- Avoid touching the soft tip of the swab onto any surface.
- Only remove the swab from its pouch once the test is ready to be performed.
COLLECT NASAL SWAB SAMPLES FROM BOTH NOSTRILS USING THE SAME SWAB
- Insert the entire collection tip of the swab provided (usually ½ to ¾ of an inch, or 1 to 1.5 cm) inside the nostril. Refer to the diagram.
- Firmly sample the nasal wall by rotating the swab in a circular path against the nasal wall at least 4 times. Take approximately 15 seconds to collect the specimen. Be sure to collect any nasal drainage that may be present on the swab.
- Repeat in the other nostril using the same swab.
- Note: With children, the maximum depth of insertion into the nostril may be less than ¾ of an inch, and you may need to have a second person hold the child’s head while swabbing.
RELEASE SAMPLE INTO BUFFER SOLUTION VIAL
- Immediately place the nasal swab into the buffer solution vial.
- Tilt the vial to make sure that the swab tip (soft end) is thoroughly soaked and immersed in the
- buffer solution.
- Twist the swab back and forth 20 times in the buffer solution. Before taking out, roll the swab
- tip against the inner wall of the vial to release the liquid from the swab, then discard the swab.
ADD BUFFER SOLUTION TO THE TEST DEVICE
- Open the test device pouch and place the test device on a flat surface.
- Locate the sample well (S) on the test device.
- Slowly squeeze 3 drops of the buffer solution into the sample well.
CAP THE VIAL AND EXPOSE DROPPER TIP
- Tightly cap the buffer solution vial with the vial cap.
- Remove the purple part of the cap from the vial to expose the dropper tip. Avoid touching the dropper tip.
LET THE TEST DEVICE SIT FOR 20 MINUTES AND READ TEST RESULTS
- Start a timer for 20 minutes. Leave the test device on a table or flat surface until the timer goes off.
- Read the test line (T) and control line (C) results promptly at 20 minutes, and not earlier to ensure proper test performance.
- Results after 25 minutes should not be used.
DISPOSE OF USED TEST KIT MATERIALS
- Dispose of all used test kit components and swab samples in a trash receptacle.
- Do not flush or pour test liquids down the drain.
How do I interpret the results?
There will be a control line and a test line on the test strip. If both lines appear, the result is positive. If only the control line appears, the test is negative.
Positive Result: Both control (C) and test (T) lines are visible.
A positive result means the virus's proteins were detected in your sample, indicating a likely COVID-19 infection. Even if you're asymptomatic, consult your healthcare provider for further guidance.
Negative Result: Only the control (C) line is visible.
A negative result means the virus's proteins were not detected. However, this does not rule out infection as a false-negative is possible. Your healthcare provider may recommend additional tests or serial testing if you have symptoms or recent exposure to COVID-19.
Invalid Result: No control (C) line. The test must be repeated.
When looking at the results, one should consider recent exposure to COVID-19, medical history, and any symptoms they might be showing or experiencing.
What should I do if I test positive?
If you receive a positive result, follow local health guidelines regarding isolation and seek medical advice. Inform your close contacts and consider reporting the result to health authorities. Follow up with a healthcare provider for confirmatory testing and further steps.
What if my test result is negative but I still have symptoms?
A negative result indicates that the test did not detect SARS-CoV-2 at the time of testing. If symptoms persist, you should continue to follow health guidelines, consider retesting, and consult with a healthcare professional for further evaluation.
What should I do if I get an invalid result?
An invalid result means the control (C) line did not appear. Use a new test kit to perform the test again or contact customer support for guidance.
Can I get a false negative or false positive result?
False Negatives: More likely with low viral loads. If symptoms persist or exposure to COVID-19 is suspected, follow up with a molecular test (PCR).
False Positives: Rare but possible. If you test positive without known exposure or symptoms, consult a healthcare provider.
What factors could lead to incorrect test results?
The test cannot differentiate between SARS-CoV and SARS-CoV-2, so other coronaviruses may cause positive results.
Testing too early or too late during infection can result in inaccurate results.
Improper handling of the test kit can also lead to errors.
How should I dispose of the test materials?
Generally, the used kit can be placed in your regular household waste, following local waste management regulations. You can also check the kit’s instructions for any specific disposal guidelines.
Additional Information
How should I store the test?
Store the test in a cool, dry place between 2-30°C (35.6-86°F). Avoid freezing or exposing the test kit to direct sunlight.
What is the shelf-life of the INDICAID test?
The INDICAID test has a shelf-life of 15 months from the date of manufacture, which includes a 3-month extension authorized by the FDA. The expiration date can be found on the label of the outer packaging.
Can INDICAID detect the Omicron variant?
Yes, studies show that INDICAID performs similarly when detecting the Omicron variant of COVID-19 compared to the original strain of the virus.
Can the INDICAID OTC COVID-19 Rapid Antigen At-Home Test be used for travel purposes?
Whether the INDICAID OTC COVID-19 Rapid Antigen At-Home Test can be used for travel depends on the specific travel requirements of airlines, countries, or regions. Here are some important factors to consider:
Travel Requirements: Many destinations require a COVID-19 test taken within a specific time frame before travel. Some accept antigen tests, while others may require a PCR test instead.
Supervised Testing: Certain authorities only accept tests that are administered or supervised by a healthcare professional, either in person or via telehealth. Unsupervised at-home tests may not meet these criteria.
Documentation: Many travel authorities require official proof of a negative test result. The INDICAID OTC test, if performed at home without supervision, may not provide the formal documentation needed for travel purposes.
Always check the specific requirements of your destination before relying on an at-home test for travel.
Who should I contact if I encounter issues with my test kit or have questions about the results?
For assistance with your test kit or any questions about your results, please reach out to our customer support team at hi@shopvida.com. We are committed to providing timely support and resolving any issues.
How can I track my order or check the status of my COVID-19 test kit purchase?
You can track your order status through our website using the order tracking feature or by contacting our customer service team with your order details.
What should I do if my test kit is damaged or missing parts?
If you find that your test kit is damaged or has missing parts, please contact our customer support team immediately. We will arrange for a replacement or provide further instructions.
Can I get a refund if I’m not satisfied with the test kit?
If you are not satisfied or experience issues with the test kit, please contact our customer support for assistance or to discuss potential refund options.
Shipping
This item is shipped free with standard shipping, separate from other items purchased. If you require expedited shipping, don't hesitate to get in touch with customer service immediately after placing your order.
Comments
0 comments
Please sign in to leave a comment.